Thread: Radius Rod to Backing Plate Bolts not tight
View Single Post
Old 03-19-2018, 12:52 PM   #9
Benson
Senior Member
 
Benson's Avatar
 
Join Date: May 2010
Posts: 2,594
Default Re: Radius Rod to Backing Plate Bolts not tight
Quote:
Originally Posted by 1955cj5 View Post
Here is a picture of my e-brake carrier and baffle.

Notice the spacers between the two parts...
Yes that is the original style.

The spacers are spot welded or somehow fastened to plate on original.
Last edited by Benson; 03-20-2018 at 08:01 AM.
Benson is offline   Reply With Quote