View Single Post
Old 12-06-2018, 11:19 PM   #7
whirnot
Senior Member
 
whirnot's Avatar
 
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,053
Default Re: Weld and grind roller tracks

I just finished mine using a 4 1/2 grinder with a cutoff wheel. Marked the cut line and cut off the excess weld to near the mark. Then used the cutoff wheel like a grinder and carefully ground to where I wanted it, measuring often. Worked fine. The wheel makes a nice flat grinder.
__________________
Bill Worden

1929 Roadster
1929 Briggs Town Sedan
1930 Closed Cab pickup
Smith Motor Compressor
1951 Ford F1

High Desert Model A's
whirnot is offline   Reply With Quote