[Werner]

Hallo und guten Tag Colin.

Glysantin is a (PEG) polyethylene glycol and dissolves many plastics that contains plasticizers. Also epoxy resins.
(Resistant are e.g. 'Nylon', 'Teflon', silicone rubber and sometimes 'Viton'.)

In the photo you see an attempt many years ago for a temperature sensor on my Traction Avant. I used R&G epoxy. This condition was shown about after 2 weeks / 300 mls later.


Hallo History.

Thank you for the detailed explanation. My motor / gearbox / clutch unit is unfortunately not yet installed. I'm still waiting for the steering shaft. I think it is better to install the revised steering at first.






-