The Ford Barn - View Single Post

100IH · 07-10-2018, 01:33 PM

Cam may have lost it's relation to the crankshaft - broken teeth on fiber gear. The procedure has been covered hundreds of times here. Good time to get familiar with the advanced search feature. Try it, you'll like it. Saves a lot of time. Then, if you don't understand, I'm here to help and others as well. The picture in your mind is basically what is the 4 stroke cycle. Got to picture it to understand it. Model As are simple but the 4 strokes and piston position concept is universal. The goal is not to get the car running, its get the understanding to know what to do with the basic test results.

07-10-2018, 01:33 PM	#12
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 970	Re: No compression Cam may have lost it's relation to the crankshaft - broken teeth on fiber gear. The procedure has been covered hundreds of times here. Good time to get familiar with the advanced search feature. Try it, you'll like it. Saves a lot of time. Then, if you don't understand, I'm here to help and others as well. The picture in your mind is basically what is the 4 stroke cycle. Got to picture it to understand it. Model As are simple but the 4 strokes and piston position concept is universal. The goal is not to get the car running, its get the understanding to know what to do with the basic test results.