The Ford Barn - View Single Post

Clem Clement · 12-25-2020, 02:38 PM

YAHOO!!! I found the separate gear and a complete regulator with a new rack. I was told they were impossible, so I dug in and had 3 in a year. (You do know that later on the potmetal gear was not used: a serrated thick piece of sheet metal was formed as the gear. This design did not fail.)

I bought the repo potmetal gears from
Greg Coleman
PO Box 75
Milledgeville, IL. 61051.
Pay for mailing and it is yours.

If you want the entire regulator, please make a offer.
Happy New Year.

12-25-2020, 02:38 PM	#12
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,393	Re: 1935 Pickup Windshield Regulator YAHOO!!! I found the separate gear and a complete regulator with a new rack. I was told they were impossible, so I dug in and had 3 in a year. (You do know that later on the potmetal gear was not used: a serrated thick piece of sheet metal was formed as the gear. This design did not fail.) I bought the repo potmetal gears from Greg Coleman PO Box 75 Milledgeville, IL. 61051. Pay for mailing and it is yours. If you want the entire regulator, please make a offer. Happy New Year.