The Ford Barn - View Single Post

Vic Piano · 03-25-2021, 07:01 PM

Well, I finally got around to getting a convertible top for the '39 Lincoln Zephyr Convertible Club Coupe. I trying to locate a source for the rubber bumpers that fit on the bottom of the top irons that fill the gap between the body and the top irons at the rear of the doors when the top is in the closed position. I have the OEM rubber but they are hard as a rock. If I can't fine a good set, I'll try to make a mold and see if I can make some new ones. these are unique to the Zephyr, the Ford & Mercury are different. Thanks in advance for any help.

03-25-2021, 07:01 PM	#2799
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour Well, I finally got around to getting a convertible top for the '39 Lincoln Zephyr Convertible Club Coupe. I trying to locate a source for the rubber bumpers that fit on the bottom of the top irons that fill the gap between the body and the top irons at the rear of the doors when the top is in the closed position. I have the OEM rubber but they are hard as a rock. If I can't fine a good set, I'll try to make a mold and see if I can make some new ones. these are unique to the Zephyr, the Ford & Mercury are different. Thanks in advance for any help. __________________ Imagination is more important than knowledge.