The Ford Barn - View Single Post - Model B Fuel Pump HYGRADE fp-159

Ranger351 · 03-29-2020, 02:44 PM

I did email Charlie, I'm north of buffalo, NY so he appears to be local.
Unfortunately the pull rod doesn't match up with the standard AC rebuild kits, it's staked on to the diaphragm, I wish it were put on with a nut or bolt...I have found a diaphragm and rod that has the same dimensions out of Australia https://classiccarbs.com.au/index.ph...roduct_id=1637

I'm looking into those associated AC pn's without much luck....I know these have to exist...just not looking in the right spots (plus I'm trying to save a bit of coin along the way....) I figure there has to be an aftermarket one that should work, for less than $200-$300 the originals seem to be...the dodge airtex pumps are about $50-60 new....

03-29-2020, 02:44 PM	#5
Ranger351 Junior Member Join Date: Feb 2020 Posts: 3	Re: Model B Fuel Pump HYGRADE fp-159 I did email Charlie, I'm north of buffalo, NY so he appears to be local. Unfortunately the pull rod doesn't match up with the standard AC rebuild kits, it's staked on to the diaphragm, I wish it were put on with a nut or bolt...I have found a diaphragm and rod that has the same dimensions out of Australia https://classiccarbs.com.au/index.ph...roduct_id=1637 I'm looking into those associated AC pn's without much luck....I know these have to exist...just not looking in the right spots (plus I'm trying to save a bit of coin along the way....) I figure there has to be an aftermarket one that should work, for less than $200-$300 the originals seem to be...the dodge airtex pumps are about $50-60 new....