The Ford Barn - View Single Post - The alignment of 28-9 model A roadster P/U body on chassis

pooch · 12-05-2016, 09:15 AM

Make sure the door front inner edge is parallel with cowl post at A pillar jamb.

You do not have an outside gap to judge by on a roadster re bent or worn hinges.

12-05-2016, 09:15 AM	#3
pooch Senior Member Join Date: Sep 2010 Location: South Coast NSW Australia Posts: 2,596	Re: The alignment of 28-9 model A roadster P/U body on chassis Make sure the door front inner edge is parallel with cowl post at A pillar jamb. You do not have an outside gap to judge by on a roadster re bent or worn hinges.