The Ford Barn - View Single Post

ken ct · 04-05-2013, 06:43 AM

I would use a brass one any day over a cork one. Test even a new one in a pan of hot water on stove before using.Use a lrg. needle nose pliers on the middle of the float[lightly]completely immerse float in water. NOT boiling. Bubbles will come out of a leak like a inner tube.ken ct.

04-05-2013, 06:43 AM	#2
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: Gas gauge floats I would use a brass one any day over a cork one. Test even a new one in a pan of hot water on stove before using.Use a lrg. needle nose pliers on the middle of the float[lightly]completely immerse float in water. NOT boiling. Bubbles will come out of a leak like a inner tube.ken ct.