Quote:
Originally Posted by grf
I am trying to confirm the wire gauge for a 1930 model a ford
the harness on my veh has been replaced with incorrect wire
I assume the charging system would be 10 gauge and 12 gauge and the lights horn ignition would be 12 to 14 gauge
would that be correct
thanks Gerry
|
Per RG's...
"All lamp wiring harnesses used 16-gauge wire" (Except Early 1928 vehicles...Read the RG's);
"The wires from the terminal box to the generator cutout and to the battery connection on the starter switch were larger 12-gauge wire".
"The wire from the ignition switch to the coil (red wire) was 16-gauge until October 1928 when it was changed 12-gauge. The black wire from the coil to the terminal box was 16-gauge throughout production".
Pluck