View Single Post
Old 08-27-2019, 12:58 AM   #14
RalphM
Senior Member
 
RalphM's Avatar
 
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,646
Default Re: Is There Any Epoxy That Will Stick To Brass???

I had a 59 block that I pressure tested,
It was leaking from the pan rail in the left rear, I picked at it and it was a sure enough rust hole about 1/2” diameter. I drilled it out to 3/8 pipe size, tapped it and JB welded a brass plug in it.
Filed it flat for the pan gasket and it’s still going strong today, no leaks.
RalphM is offline   Reply With Quote