Re: Head gasket?
Quote:
Originally Posted by BRENT in 10-uh-C
... As for increasing the torque greater than 55 pound, (-or insert any number over 50 pounds) you really do not receive any more clamping force that is beneficial.
|
Guten Abend Brent,
I didn't understand everything correctly because of the foreign language. But if a newly ground C-head still seeps a little past the composite seal, then a stronger torque must cause a higher pressure = joint tightness?
__________________
Beste Gruesse aus Deutschland,
Werner
Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
|