The Ford Barn - View Single Post

FrankWest · 12-07-2014, 09:59 AM

I took off all the bolts from the timing cover but have a problem. Not sure if there is still one screw under the engine support bracket which is disconnected bu cannot be removed because the timing cover has two ledges cast in the timing cover that actually overhand the support bracket. Strange, but my spare model B engine does NOT have these overhangs? I looked in all my books Model A and 1933 ford for disassemble instructions but can't find anything.
see diagram
Purple are the bracket and screws I removed

There is enough play in the bracket that if all they screws were removed I think the cover could be slid off.

12-07-2014, 09:59 AM	#154
FrankWest Senior Member Join Date: Sep 2013 Posts: 3,005	Re: 1933 can't start after recent restart I took off all the bolts from the timing cover but have a problem. Not sure if there is still one screw under the engine support bracket which is disconnected bu cannot be removed because the timing cover has two ledges cast in the timing cover that actually overhand the support bracket. Strange, but my spare model B engine does NOT have these overhangs? I looked in all my books Model A and 1933 ford for disassemble instructions but can't find anything. see diagram Purple are the bracket and screws I removed There is enough play in the bracket that if all they screws were removed I think the cover could be slid off.