The Ford Barn - View Single Post

Asron82 · 09-02-2022, 08:10 AM

Hi All,

Sorry if this is a dumb question this is my first time dealing with this hopefully someone can help me out. Me and my dad got an motor block that we was told was machined a while back to .080 over and never assembled or anything. Anyways we measured the bore and 2 cylinders are 3.955 according to what i have seen that is .080 over the other 2 cylinders we keep getting 3.952 a little smaller. our question is will .080 Over rings and pistons still work even if the bore is a hair smaller?

09-02-2022, 08:10 AM	#1
Asron82 Junior Member Join Date: Nov 2014 Location: Texas Posts: 13	Piston Question Hi All, Sorry if this is a dumb question this is my first time dealing with this hopefully someone can help me out. Me and my dad got an motor block that we was told was machined a while back to .080 over and never assembled or anything. Anyways we measured the bore and 2 cylinders are 3.955 according to what i have seen that is .080 over the other 2 cylinders we keep getting 3.952 a little smaller. our question is will .080 Over rings and pistons still work even if the bore is a hair smaller?