View Single Post
Old 09-06-2020, 08:23 PM   #11
Senior Member
Join Date: Sep 2019
Location: Kountze,TX
Posts: 309
Default Re: Borg-Warner OD Wiring

Originally Posted by Doug Linden View Post
I think the switch you installed is better than the kickdown switch.
Also make sure you check the oil regularly as the planetary gear needs lubrication or the small needle bearings will fail.

Thanks, not sure how much I will use that switch but it may come in handy.

Thanks for the maintenance tip. I was kinda surprised that there isn't much capacity.
DBSHELTON is offline   Reply With Quote