View Single Post
Old 08-30-2020, 09:32 PM   #1
DBSHELTON
Senior Member
 
Join Date: Sep 2019
Location: Kountze,TX
Posts: 309
Default Borg-Warner OD Wiring

I installed a Borg-Warner OD in my Huckster. Now I am trying to figure out the wiring. There are quite a few different wiring diagrams out there and I am really confused. 6 volt Positive ground system. On the unit, I have 2 wires coming out of the OD Solenoid and there is 1 wire coming out of the OD Governor. I have an old Standard Blue Streak 3 post relay. 1 terminal marked "B" 1 marked "L" and 1 marked "S". My intent is to use an over-ride switch instead of a kickdown switch. I guess I could mount the kickdown switch on the dash instead. Can someone help me figure out how this all ties together?

Last edited by DBSHELTON; 08-31-2020 at 06:11 AM.
DBSHELTON is offline   Reply With Quote