The Ford Barn - View Single Post

Blastfromthepast · 10-25-2020, 05:24 PM

Hi swedishsteel, the problem isn’t that the hoses are falling off its when I put the lower hoses on and tighten the clamps I’m able to turn the hoses. It seem that I am unable to get them tight enough and I’m thinking that it will cause a leak. Also I noticed that the hoses are straight but the radiator is a little lower then the motor mounts water inlet causing the lower hose to pull down possibly causing a leak.

10-25-2020, 05:24 PM	#17
Blastfromthepast Senior Member Join Date: May 2017 Location: NY Posts: 318	Re: 1936 lower radiator hoses installation Hi swedishsteel, the problem isn’t that the hoses are falling off its when I put the lower hoses on and tighten the clamps I’m able to turn the hoses. It seem that I am unable to get them tight enough and I’m thinking that it will cause a leak. Also I noticed that the hoses are straight but the radiator is a little lower then the motor mounts water inlet causing the lower hose to pull down possibly causing a leak.