I’m sure you can pull them as a unit, if that’s what you’re asking. But I think you’ve got the front sump pan with the steering under the pan in the middle. So the raise and tilt will be different than the bird. You’ll probably need to get the car up a bit to raise and tilt it enough to clear the tail shaft on the floor. Regardless, a good cherry picker (tall) ( or an gantry) and a tilt device are your best friend. Just watch the weight ratings, a y block and a Fordo aren’t light.
There’s a lot of these out there, but watch the weight ratings.
https://www.amazon.com/Torin-Engine-...a-571053070945