The Ford Barn - View Single Post

rotorwrench · 08-25-2019, 03:13 PM

The pin in the tower is there to keep the shifter lever socket & ball aligned properly. It should be relatively tight in the bore. There are fixes for this if it's loose.

08-25-2019, 03:13 PM	#21
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,431	Re: Transmission Issues The pin in the tower is there to keep the shifter lever socket & ball aligned properly. It should be relatively tight in the bore. There are fixes for this if it's loose.