Thread: Removing fan blade
View Single Post
Old 08-03-2019, 03:06 PM   #2
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,009
Default Re: Removing fan blade
crack the nut, hold pump in two hands by the fan blades , if you have 3 hands give the nut a tap with hammer & it should crack the taper, NOW when fitting alloy fan make sure you put a thin steel washer on before the nut ,
quickchange is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)