The Ford Barn - View Single Post

bobbader · 04-20-2019, 04:52 PM

Steve,

The plate was welded to the bracket with spot welds with a "lobster claw" welder. There are/were no holes drilled in either the plate or the bracket but a good clean original assembly will show the deformation "dots" in either piece.

Bob Bader

04-20-2019, 04:52 PM	#2
bobbader Senior Member Join Date: May 2010 Location: Huntington, NY Posts: 271	Re: Welding Battery support to plate... Steve, The plate was welded to the bracket with spot welds with a "lobster claw" welder. There are/were no holes drilled in either the plate or the bracket but a good clean original assembly will show the deformation "dots" in either piece. Bob Bader