02-04-2013, 09:05 PM
|
#7
|
Senior Member
Join Date: May 2010
Location: norcal
Posts: 173
|
Re: 40 Instrument Panel (Standard):
Quote:
Originally Posted by 4dFord/SC
Probably the hardest part is the contortions required to remove and then reinstall the cluster.
|
i have one in my little pickup, in and out a couple times but i can take my seat out and use blocks to raise up to the level of the seat riser.
that way i dont have to contort this pushing 60 back that much.
you should be able to get it once you see where the mounting screws are it will come right out, remove the light sockets so it will come all the way down.
rich
|
|
|