Re: Rear axle shaft nut, how to turn on
Hello.
The repair of the outer bearing ring works very well. Both were easy to press in; left 5 to, right only 1 to. Loctite to it!
It's exactly to see that the makeshift roller bearing has smaller rollers. This is not a problem with the load capacity if use a modern synthetic high-pressure grease (no graphite, no MoS2!).
Do not throw away the old rolling bearing in the garbage. It makes a good help to press in the race and the simmering.
__________________
Beste Gruesse aus Deutschland,
Werner
Ford Model A, Roadster, 1928
Citroen 11 CV, 1947
Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version
|