Quote:
Originally Posted by Cool Hand Lurker
Good idea Tom. It seems that sand will always find a way to get in, kind of like mice. If you find that sand still gets in, you can cut a disc from a plastic bag just a little larger than the aluminum disc with a bolt hole in the middle and use it for a gasket to be sure of a seal.
|
Actually I did cut some circles out of a 1/4" thick foam pad I have, and that does the trick. I also install screws in the mounting holes for the cutout and mounting bracket to keep the sand out.
You're certainly right about the sand gets everywhere. I even wish my blast cabinet was outside instead of the basement.