Thread: Question on power to the light / horn switch
View Single Post
Old 10-14-2020, 01:58 PM   #8
Ruth
Senior Member
 
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,339
Default Re: Question on power to the light / horn switch
Quote:
Originally Posted by Kurt in NJ View Post
There should be 2 wires going from cutout to light switch, one for lighting, one for horn---
3 wires from cutout, one to light switch for lighting, one to horn first then to horn button via the light switch. third wire to junction box.

Quote:
Originally Posted by JayJay View Post
My '30 CCPU has two wires from the cutout - one to the horn, one to the terminal block. Nothing to the light switch. Everything works, though. This seems to be a commercial wiring harness.

JayJay
I'm curious, where does the pwer to the lights come from?
__________________
Ruth
"Sometimes you really DO need to read the whole thread"
Last edited by Ruth; 10-14-2020 at 02:09 PM.
Ruth is offline   Reply With Quote