View Single Post
Old 01-07-2020, 07:41 AM   #3
Senior Member
ryanheacox's Avatar
Join Date: Apr 2013
Location: Northwest CT
Posts: 810
Default Re: Remove sector needle bearings

It was pitted in the areas of the needle bearings, looked okay in the space in between. It was an original Ford part. Giving it some more thought, I should just change the bearings. The kit is $15 for the bearings and seal. I have a soft spot for Torrington bearings since they were made in the area but I'm sure the right thing is to change the bearings.

That being said, what is the easiest way to get them out?
ryanheacox is offline   Reply With Quote