[TonyM]

1937 Ford Aluminum Intake, Stromberg 97, new fuel pump and fuel line to be installed soon; re-wired tail lights, crossover harness, body harness and fuel sender up to the front--here are the old wires, which were found to be in very poor condition; these tail light looms look good but in reality are really breaking down. I put in new harness from Narrangansette Reproductions.

I will be taking out the front seat so that I can rewire under the instrument panel and through the dash; have new fuse block/resisting unit. Rewired headlights and horns; headlight harness is ready to install up to the switch body. Stop light switch had about a quarter inch of grime and grease encasing it. Cleaned it up and re-installed--hope it works; if not I have a new one. Looking forward to finishing up the rewire and manifold install. The weather is breaking so the unheated garage won't be so unheated.