[Dodge]

32-34 axle, 32-34 spindles, Model A King Pins, 32-34 spring perches, Model A brake actuators, 32-34 Brakes. Works great.
I don't know what to use if you use Model A brakes.
The 32-34 King pins are at the wrong angle as are the actuators.
I just did this swap and getting ready to do another one.
You also need to make up a 5/8 spacer to put under the leaf spring if you run a reverse
eye front spring with less leaves, I used the one from Speedway.
And yes you can use the Model A spring perches if you use hydraulic brakes.
Mechanicals need the 32-34