View Single Post
Old 12-10-2018, 01:02 PM   #4
SeaSlugs
Senior Member
 
SeaSlugs's Avatar
 
Join Date: May 2010
Location: Central, IL
Posts: 3,920
Default Re: Exh. manifold to muffler; does anyone make....

Quote:
Originally Posted by Big hammer View Post
Make your own! Block of wood drill a hole the pipe will slip through, grind a taper in the wood and with a hammer form the flange. With a miss fitting flange I've reformed the flange to seal better. Something like a tubing flare tool only bigger would work
Yup - once you get it close using the block of wood use an old junk manifold to beat the perfect fit against. Ive got a pile of warped manifolds or severely pitted/blown out/broken eared ones.
__________________
1929 Model AA - Need long splash aprons!
SeaSlugs is offline   Reply With Quote