Mac's parts arrived today, removed lower hoses this evening, old hoses were as hard as a rock, then removed the motor mounts, when I had looked at them there were strings of material hanging down for the passenger side mount, ( like it was melting ) finally got both of them out. Now I opened package with new motor mounts, BUT something is not working out, first the hole is cross member is smaller than the lower bushing, looks to be 5/8" hole and the bossed part of lower bushing is 7/8", also the top side of cross member is recessed, the large washer is bigger than the recess, any info is appreciated!!!
1.
Old motor mounts and one new one
.
.
.
