Re: cracked cyl head
We got the head off and I've done some cleaning on the engine, not through yet though.
So far everything looks good to my eyes. I have sent the replacement head to be resurfaced and probably won't have it back until Wednesday or Thursday. I found that the engine has been bored .080 when rebuilt.
I can feel no "slop" in the pistons or in the valves, and see no cracks anywhere, looking closely between the valves. The open valves and seats look good. What else can I check while the head is off?
Last edited by thom; 10-07-2019 at 02:08 PM.
|