Quote:
Originally Posted by rockfla
Michael
That's what I am afraid of....I don't want to take any chances. NOW the issue is with mine completely missing either getting a whole new pan OR figuring out how to make one and install it??? AND Having one made similar to stock with NO example to copy
|
Robert, Don't overthink this. You are most likely able to see where the old baffle had resided.
Two pieces of sheet metal maybe 2" in height tack welded to the side of the pan (one each side) and long enough to get close to the sump. You want to keep the sheet metal off the bottom of the pan about 1/4" or so.