The Ford Barn - View Single Post

scicala · 11-15-2019, 03:25 PM

If you get a bell crank from a '55 or '56 four barrel Y-Block V8, it will bolt on and you will have to figure out the correct length for the kick down rod. I've seen bell cranks on EBAY before. An EBAY vendor (natolibird) Felix Natoli sells bell cranks for '57 engines. He may have something that works for you. I'm pretty sure he makes them (reproductions).

Sal

11-15-2019, 03:25 PM	#7
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,698	Re: holly 4 barrel carb linkage If you get a bell crank from a '55 or '56 four barrel Y-Block V8, it will bolt on and you will have to figure out the correct length for the kick down rod. I've seen bell cranks on EBAY before. An EBAY vendor (natolibird) Felix Natoli sells bell cranks for '57 engines. He may have something that works for you. I'm pretty sure he makes them (reproductions). Sal