The Ford Barn - View Single Post - 35 V-8 stud instlation

Bored&Stroked · 05-03-2018, 11:17 AM

Yes - I always use a good coating of PTF based stud sealer . . . ARP makes some and it is good stuff. Also, coat the sides of the studs with anti-seize before you put the heads on.

https://www.jegs.com/i/ARP/070/100-9904/10002/-1

Good luck

05-03-2018, 11:17 AM	#2
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,062	Re: 35 V-8 stud instlation Yes - I always use a good coating of PTF based stud sealer . . . ARP makes some and it is good stuff. Also, coat the sides of the studs with anti-seize before you put the heads on. https://www.jegs.com/i/ARP/070/100-9904/10002/-1 Good luck