The Ford Barn - View Single Post

DavidG · 07-07-2014, 12:12 PM

65 horsepower was the original rating. The pan in the photos is the last of three versions of the '32 aluminum oil pan. As for value, if there are no cracks or other major damage it could bring upwards of $500. If there is a crack (that dark area in the front on the left side [when on an engine block] looks suspect), few have successfully welded a used '32 aluminum pan in the part of the pan in direct contact with oil.

07-07-2014, 12:12 PM	#7
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: Flat Head Oil Pan 65 horsepower was the original rating. The pan in the photos is the last of three versions of the '32 aluminum oil pan. As for value, if there are no cracks or other major damage it could bring upwards of $500. If there is a crack (that dark area in the front on the left side [when on an engine block] looks suspect), few have successfully welded a used '32 aluminum pan in the part of the pan in direct contact with oil.