The Ford Barn - View Single Post

Randy1944 · 03-28-2018, 03:08 PM

Thanks all. Right now I have one bolt that has been twisted off. (holds coil bracket). The water outlet pipe that hooks to heater hose is frozen in place. My situation is that I have parts of an old(1950-60’s) dragstrip motor. It is out of a local car raced here in my County. I have Edelbrock heads and a three carb Edelbrock intake. I also have a four stoker mercury crank and a isky ground cam. The old block (1951 mercury)is on the way to me. My hope is to restore the motor to it’s condition during its drag racing days. We shall see.

03-28-2018, 03:08 PM	#7
Randy1944 Senior Member Join Date: Jun 2010 Location: east Tennessee Posts: 363	Re: Vintage Edelbrock heads Thanks all. Right now I have one bolt that has been twisted off. (holds coil bracket). The water outlet pipe that hooks to heater hose is frozen in place. My situation is that I have parts of an old(1950-60’s) dragstrip motor. It is out of a local car raced here in my County. I have Edelbrock heads and a three carb Edelbrock intake. I also have a four stoker mercury crank and a isky ground cam. The old block (1951 mercury)is on the way to me. My hope is to restore the motor to it’s condition during its drag racing days. We shall see.