The Ford Barn - View Single Post

MAG · 02-13-2019, 11:18 PM

The 7 tooth design is not as adjustable as the 2 tooth. I have rebuilt some 7 tooth boxes and was never able to get the lash to zero at the center. That is not the case with the 2 tooth. Rebuilt several and have never had one I could not to get to zero last at Center. Admit some were more difficult to doubt always got them right.
Try to find a 2 tooth for 29 car. They are available. Some have splines for steering wheel and open segment.

02-13-2019, 11:18 PM	#2
MAG Senior Member Join Date: May 2010 Location: Austin, Texas Posts: 925	Re: Stearing sector problems The 7 tooth design is not as adjustable as the 2 tooth. I have rebuilt some 7 tooth boxes and was never able to get the lash to zero at the center. That is not the case with the 2 tooth. Rebuilt several and have never had one I could not to get to zero last at Center. Admit some were more difficult to doubt always got them right. Try to find a 2 tooth for 29 car. They are available. Some have splines for steering wheel and open segment. __________________ I noticed the harder I work the luckier I get!