Cam Gear
Ok, I'm going to remove and replace the cam gear. I was looking at the Vendors catalog and some of them carry an "Over Sized" cam gear. .003 &.005 seem to be the most commen oversized gear. They also have a Standard gear. When would you use an oversized gear and how would you know to use one? Or should I just get the standard gear and go with that. The reason I'm replacing the gear is I had the engine overhauled 18 months ago, and the gear was replaced with a inferior one.
Last edited by fredski53; 03-08-2020 at 11:17 PM.
Reason: Spelling
|