View Single Post
Old 07-29-2019, 03:12 PM   #19
ford38v8
Senior Member
 
ford38v8's Avatar
 
Join Date: Jul 2011
Location: SF Bay Area
Posts: 4,996
Default Re: Identifying carburetors

Quote:
Originally Posted by Mart View Post
It's worth adding to the info above that the carb above is commonly known as a "94". The venturi diameter is 15/16" which is roughly .94 decimal.

It could have been made by Ford Holley or Chandler Grove.

Holley also made a 1" bore carb called a 2100 and a 1-1/16" bore carb called a 2110. The bigger ones were fitted to some Y block powered vehicles.

Mart.
It's interesting that Mart, who lives in the Land of Metrics, picked up on the info that a Yank has omitted.
__________________
Alan
ford38v8 is offline   Reply With Quote