View Single Post
Old 07-29-2019, 02:26 PM   #18
Senior Member
Mart's Avatar
Join Date: May 2010
Location: Solihull, England.
Posts: 5,736
Default Re: Identifying carburetors

It's worth adding to the info above that the carb above is commonly known as a "94". The venturi diameter is 15/16" which is roughly .94 decimal.

It could have been made by Ford Holley or Chandler Grove.

Holley also made a 1" bore carb called a 2100 and a 1-1/16" bore carb called a 2110. The bigger ones were fitted to some Y block powered vehicles.

Mart is offline   Reply With Quote