The Ford Barn - View Single Post

Jim Brierley · 12-26-2019, 01:07 PM

26% Mitchell with a 4.11 rear end ratio. Most A's are comfortable at around 2100 RPM cruising speed, with the above combo that's about 65 MPH. Too low RPM's is not good for the engine!

12-26-2019, 01:07 PM	#11
Jim Brierley Senior Member Join Date: Jun 2010 Location: Temecula, CA Posts: 4,088	Re: Over Drive 26% Mitchell with a 4.11 rear end ratio. Most A's are comfortable at around 2100 RPM cruising speed, with the above combo that's about 65 MPH. Too low RPM's is not good for the engine!