The Ford Barn - View Single Post

40cpe · 11-26-2019, 08:33 PM

The two terminals with continuity: one terminal has the wire from the governor connected,
the other terminal connects to the THSW terminal on the relay.
The two terminals withOUT continuity: One terminal connects to the distributor side of the
coil. The other terminal connects to the #6 wire on the solenoid.

11-26-2019, 08:33 PM	#52
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: Overdrive solenoids The two terminals with continuity: one terminal has the wire from the governor connected, the other terminal connects to the THSW terminal on the relay. The two terminals withOUT continuity: One terminal connects to the distributor side of the coil. The other terminal connects to the #6 wire on the solenoid.