View Single Post
Old 09-09-2016, 04:49 PM   #8
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Dam radiator went out

If that overflow pipe had a crack or rust hold on the part inside the upper tank, then it could have been draining off coolant until the block overheated. It is a relatively easy fix to solder a new tube in place. Hopefully you don't have a lot of plugged radiator tubes.
Tom Wesenberg is offline   Reply With Quote