The Ford Barn - View Single Post

stewgee · 01-10-2019, 09:49 AM

Just got finished reinstalling my original 4 in my 30 A after replacing all seals and gaskets short of the head gasket. The old car was running great with no smoke but was leaking oil profusely from the rear main. Now it doesn't leak "profusely" from the rear main but still leaks. I cleaned all removed parts and surfaces and used a quality gasket sealer when I put it back together. Cleaned about 2 inches of sludge out of the oil pan and installed a new oil pump screen. Anyone have any ideas or suggestions as to what I may have done wrong (or could have done differently)? It did seem a bit difficult installing the rear seal. Sure don't look forward to pulling the engine again.

01-10-2019, 09:49 AM	#1
stewgee Member Join Date: Dec 2018 Location: Locust Grove, OK Posts: 84	Main bearing oil leak Just got finished reinstalling my original 4 in my 30 A after replacing all seals and gaskets short of the head gasket. The old car was running great with no smoke but was leaking oil profusely from the rear main. Now it doesn't leak "profusely" from the rear main but still leaks. I cleaned all removed parts and surfaces and used a quality gasket sealer when I put it back together. Cleaned about 2 inches of sludge out of the oil pan and installed a new oil pump screen. Anyone have any ideas or suggestions as to what I may have done wrong (or could have done differently)? It did seem a bit difficult installing the rear seal. Sure don't look forward to pulling the engine again.