The Ford Barn - View Single Post

redmodelt · 11-20-2019, 11:26 AM

I just push the reflector to one side to release from the tab if needed or just pop it out. The tabs are there to keep it from rotating. The original reflector had the socket offset by just a little and the tabs keep it centered. You should not need to bend them up.

11-20-2019, 11:26 AM	#7
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Remove/Replace Headlight Reflector I just push the reflector to one side to release from the tab if needed or just pop it out. The tabs are there to keep it from rotating. The original reflector had the socket offset by just a little and the tabs keep it centered. You should not need to bend them up. __________________ I know the voices aren't real but damn they have some good ideas!