View Single Post
Old 11-08-2019, 07:04 AM   #2
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 3,361
Default Re: Flathead Partially Disassembled

Appears to be 33-34 oil pan and intake appears to be 34. It may be good not to ship with the aluminum intake manifold, if you have an old cast iron intake laying around. Does the engine have a breather at the oil pan front RH side? if not then 33-34. If the oil pan is 33-34 and without the breather be careful with it, and the dip stick boss $$! If the heads are aluminum also be careful with them. for the same reasons.
Terry,OH is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)