The Ford Barn - View Single Post

holdover · 11-04-2018, 08:43 PM

if it has to come out and everything else fails, and you plan on replacing the stud, double nut it and ARC weld the stud to the top nut. This after Kroil, PB Blaster, wax, heat etc, AND A LOT OF PATIENCE. Good luck, been there and done that

11-04-2018, 08:43 PM	#8
holdover Senior Member Join Date: May 2011 Location: SW Virginia near the Blue ridge Parkway Posts: 674	Re: Double Nutting advice if it has to come out and everything else fails, and you plan on replacing the stud, double nut it and ARC weld the stud to the top nut. This after Kroil, PB Blaster, wax, heat etc, AND A LOT OF PATIENCE. Good luck, been there and done that