Sponsored Links (Register now to hide all advertisements)
I'm restoring a 29 AA cab, the same as yours, I made my own cab corners and made them 6" longer, for 3 reasons, I would like more space for leg room, adjustable seat, and a tool box and stuff like a jack and more. You wont need the 3 wood slats for the seat back, I took the seat out of a mid to late 80's f150 and cut 18" out of the center. I sheared, broke and welded 14 ga. c r steel for new corners, it turned out nice and they look good, the corner are plug welded. If you use 14 ga. c r steel, you will thank me for don't using thin metal. I extended the roof bows with oak and replaced the floor with 14 ga. c r steel. I don't have a blue print because I used the stock corners as a template to trace out the radius and dimensions, it was easy. I guess you know that you must remove the back of cab first then the corner will come off. I'm in fl. but if you interested send me a pm with email address and I will take pic's in side and out.
carry on nick c