Quote:
Originally Posted by HS
My right front inner (the larger)wheel bearing has been Peened to the front spindle. What is the best way to ensure that I have enough grease loaded into the bearing, as I can't remove it from the spindle? I have used needle adapter for my grease Gun-- seems to work
Thanks for your Help!
HS
|
Why not repair it correctly and replace the spindle assy?? If the snout of the spindle has been staked, you cannot properly set the bearing preload. If the outer bearing fails, there is a strong potential to lose steering control. This should not be a costly repair however it should be a priority because of safety factor.