View Single Post
Old 03-27-2020, 04:36 PM   #15
JOHNCL
Member
 
Join Date: Feb 2020
Location: northern Maryland
Posts: 68
Default Re: Uni-Steer advice sought

I have the brakes on the new spindles now. I had to lengthen an existing tie rod; I put the original in storage. I found the Uni-steer drag link will hit the underside of the stock wishbone when the frame rises relative to the axle. Very unsafe. So I am installing split hair pin style radius rods when I get them from Pete and Jakes. I did not want to install a 4-bar setup even though I have one in storage; it is for another project with a tube axle. The steering arms allow the tie rod and drag link to be either on top or bottom of the steering arms. Things are coming along slowly.
JOHNCL is online now   Reply With Quote